De koppeling tussen BM TG 20401 en WiresX Hobbyscoop room hoe werkt dat?

Bron: BrandMeister Wiki

Sinds gisteren bestaat er een actieve koppeling tussen BrandMeister TG 20401 en de Wires X room Hobbyscoop NL. In deze room zijn de, ook gisteren geactiveerde, C4FM repeaters PI1NOS en PI1AMS gekoppeld. Via DMR TG 20401 kan je elkaar dus bereiken. De room zal de komende tijd met meer repeaters worden uitgebreid. Voor C4FM gebruiker let op dit werkt alleen in DN mode! Rudy PD0ZRY legt in de wiki uit hoe dit werkt.

WIRES-X
Starting BrandMeister release 20160421-112227 has support of WIRES-X connectivity.
WIRES-X Link allows:

To make bridges between DMR talking groups and WIRES-X rooms
Transfer voice calls between BrandMeister Network and WIRES-X network with audio quality 1:1 and signaling conversion
Benefits

Fully transparent calls between DMR and WIRES-X
Full call signaling support in both directions
Sound quality is 1:1 in both directions
No extra hardware is required(*)
Late call entry is supported on both sides in both directions
System Fusion / WIRES-X side doesn’t loose any features
Each BrandMeister Server can be connected to several rooms
Conceptual view

Limitations

Room should be run in digital only mode
Room should have static IP and not use UPnP port forwarding (manually forwarded UDP ports or direct connection)
Link allows Fusion calls in DN (A/D type 1 or type 2) mode only, VW (Voice FR) calls will be silent in DMR
Calls from DMR cannot be audited via WIRES-X node or WIRES-X Remote Monitor (call will be silent on this software)
BrandMeister server requires registered node ID and Call-Sign at Yaesu WIRES-X System (these credentials should not be used by any node or you should grant that node with these credentials will never be connected to required rooms)
Additional features

CLI-based support of chat for WIRES-X administrators:
Incoming messages are available via syslog
D-BUS API to send messages
Additional CLI utility SendWiresXMessage.php (not supplied to distribution)
WIRES-X directory service (ILS) client can be implemented as external utility
D-BUS API to connect rooms including support of rooms behind UPnP NAT
WIRES-X directory service client is not in scope of project for now
Allocated ports

UDP 46110
UDP 46112
Configuration

 

Comments are closed.